ENGINEERING PERSPECTIVES / FVX-PM4801Q

Planning a 48V power-stage evaluation

A practical starting point for a technical discussion. This brief describes evaluation questions, not validated product performance.

01

Define the input envelope

Document nominal, minimum and maximum supply voltage, transient events and the expected load profile.

02

Review the external power stage

Confirm output requirements, MOSFET and inductor selection, switching conditions and board layout with the controlled design documentation.

03

Agree the validation matrix

Request efficiency, temperature-rise and fault-response results at the operating points relevant to your system.

Before design-in, obtain the current controlled datasheet, evaluation conditions and release status.
Discuss your requirements
EVALUATION WORKBOOK

Prepare an actionable review.

Design considerationEvaluation focus
Input target¹9–80 V DC
Process¹180 nm high-voltage BCD
Package¹QFN-32, 5 × 5 mm
Efficiency target¹96.8% peak; operating point unconfirmed

Evidence to collect

  1. Measure no-load, light-load and full-load conditions.
  2. Capture switching-node overshoot with appropriate probing.
  3. Validate short-circuit recovery and thermal limits.

Record the test configuration

Include board revision, firmware version, supply settings, ambient conditions, instrument calibration and the acceptance criterion. Keep raw results linked to the exact device and document revision.